MT10 in to a WiFi template

[Tuvestam]

Hi,

I have all my MR36 in a WiFi template and want to add the MT10 in to that. But the MT10 is not addable to my WiFi networks just the appliancenetwork i have. And there is no MR36 in them.

[cmr]

@Tuvestam you can only add the appropriate devices to each network and a combined network is simply a collection of functionally specific networks.  i.e. MRs in a wireless network, MSs in a switch network etc.  I'd have thought you'd need a network type of sensor, but are you saying that it wants you to add it to an appliance (MX) network?

One other thing to check is that the network that you are trying to add the sensors to has the MRs on 27.5.11, not 27.5.1 as you need the .11 version.  It should be offered as an upgrade once you have claimed the MT

[Tuvestam]

I got it working after doing what this link say (For MG but work for MT too).
https://documentation.meraki.com/MG/MG_Templates_Best_Practices#Appending_MG_Cellular_Gateway_Networ...https://documentation.meraki.com/MG/MG_Templates_Best_Practices#Appending_MG_Cellular_Gateway_Networ...

And then updating to 27.5.11