securing Port Forwarding and NAT Rules on the MX

[JED2021]

https://documentation.meraki.com/MX/NAT_and_Port_Forwarding/Port_Forwarding_and_NAT_Rules_on_the_MX

is there a way   for both wan 1 and wan 2 to permit  only a specific host or CIDR to access the port forwarded policy.

This is a good article but does not mention a source IP

Thanks 

[KarstenI]

You can specify which sources are allowed to use the configured NAT rule. It's also shown on the mentioned document with "remote IP".

[PhilipDAth · Accepted solution]