Dear Sir,
My MX64 device WAN static IP is :- 192.168.8.104
![wan ip.JPG wan ip.JPG](https://community.meraki.com/t5/image/serverpage/image-id/9156iEE7D62C0B072381A/image-size/large?v=v2&px=999)
And VPN status as :-
![vpn status.JPG vpn status.JPG](https://community.meraki.com/t5/image/serverpage/image-id/9157i8999A7500536259F/image-size/large?v=v2&px=999)
NAT traversal :- ![nat traversal.JPG nat traversal.JPG](https://community.meraki.com/t5/image/serverpage/image-id/9158i43E7ED89761A15CF/image-size/large?v=v2&px=999)
My question is that port : 48822 in NAT type are fixed for each cisco meraki device or
if MANUALLY : PORT FORWARDING as :-
![portforwarding.JPG portforwarding.JPG](https://community.meraki.com/t5/image/serverpage/image-id/9160i3B3ED7F3A068357B/image-size/large?v=v2&px=999)
![forwarding no and port.JPG forwarding no and port.JPG](https://community.meraki.com/t5/image/serverpage/image-id/9161i7190ECCCC060B471/image-size/large?v=v2&px=999)
Than we have to type ip = 192.168.8.104 and port : 48822
in above case we have to use same port or we can use any unreserved port.
Because there is a device which is giving as : -
"NAT type: Unfriendly" or "VPN Registry: Disconnected"
Thanks and regards.