mx ipv6

jOMeraki2
Here to help

mx ipv6

hi all

I have a max 64 connected with the isp router direct  MX takes IPv4 and ipv6 from the isp router but I want to disable IP v6 because i have device take ipv6 and I try to stop IPv6 on isp router but i can't  any solution note that 

 

 

and the client takes ipv6 andstatic.PNG

And the Client takes ipv6  

 

  

 

3 REPLIES 3
Brash
Kind of a big deal
Kind of a big deal

I'm not aware of any way to disable ipv6 on the wan interface through the dashboard.

Meraki support can probably disable it on the backend. 

Otherwise you should be able to ask your ISP to disable ipv6 on your service.

PhilipDAth
Kind of a big deal
Kind of a big deal

If you go "Security & SW-WAN, Addressing & VLANS", you can disable IPv6 on the LAN side of the MX.  Then nothing behind the MX will get an IPv6 address.

 

PhilipDAth_0-1656881099052.png

 

I HAVE A Flat network AND my sub  192.168.0.0/24 and I have DHCP server 192.168.0.55 but my devise take ipv6 i don't know why  just i have the isp router he has ipv6 but Apparently the mx is allowed to distribute from the isp router 

Is this logic
Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels