What is the electrical connector type on the back of a Meraki MX100 and a Meraki switch MS120

[Schiller]

Hey!

I need to order a new connector for a Meraki MX100 and an MS120-48FP, but I don't know their correct connector type (IEC).
If anyone knows, please advise.

[Mloraditch]

MX100 and MS120 use regular C13. A C15 cable would also be compatible and allow reuse with higher voltage gear if necessary.

[Schiller]

Thank your for your quick response @Mloraditch 

[PhilipDAth]

C13 is rated to 65 degrees Celsius.

C15 is rated to 120 degrees Celsius.

They have the same voltage rating.  C15 was initially intended to be used with jugs that can operate up to 100 degrees Celsius.

[Schiller · Accepted solution]

Thank you @PhilipDAth 

[BlakeRichardson]

For those that aren't kiwi a jug is what we call a kettle in NZ 😂

[BlakeRichardson]

Both use standard power cords. If you are going to plug these into a UPS you will want a C14 to C13 cord. 

[Schiller]

Thank you @BlakeRichardson