Warmspare for 2DCs physically separated

Solved
kima25
Here to help

Warmspare for 2DCs physically separated

Hello,

 

For my SD-WAN project, the client has two physically separated data centers connected via a Level 2 link. Can I place an MX in each data center and use Warm Spare with a single license for both MX units? If so, what are the potential drawbacks of this solution?

 

Thank you for your help!

1 Accepted Solution
PhilipDAth
Kind of a big deal
Kind of a big deal

You can, but if the single L2 link fails, both will go master/master, so there is little redundancy.  You might have to manually intervene during a failure and turn off one of the MXs (which is also an acceptable DR method if it is part of your plan).

 

You could consider getting a pair of L2 circuits (ideally channelled together) for redundancy.

View solution in original post

2 Replies 2
Inderdeep
Kind of a big deal
Kind of a big deal

Only one license is required for an HA pair. The warm spare unit does not require a separate license. Alerts for Warm spare failover can be configured on the Alerts and Administration page.“

https://documentation.meraki.com/MX/Deployment_Guides/MX_Warm_Spare_-_High_Availability_Pair

 

Do I need duplicate licenses to cover my security appliance in a warm spare configuration?

A: No, if two security appliances are in a warm spare/HA configuration licensing is only required for one of the two devices. The only additional cost of a warm spare configuration is the redundant hardware.“

https://documentation.meraki.com/zGeneral_Administration/Licensing/Meraki_Licensing_FAQs

Regards/Inder
Cisco IT Blogs awarded in 2020 & 2021
www.thenetworkdna.com
PhilipDAth
Kind of a big deal
Kind of a big deal

You can, but if the single L2 link fails, both will go master/master, so there is little redundancy.  You might have to manually intervene during a failure and turn off one of the MXs (which is also an acceptable DR method if it is part of your plan).

 

You could consider getting a pair of L2 circuits (ideally channelled together) for redundancy.

Get notified when there are additional replies to this discussion.