WAN1 IP address changing

SOLVED
GarageLand42
Conversationalist

WAN1 IP address changing

We are changing our ISP which is connected to WAN1.   WAN1 currently has a static IP. 

Do I simply connect to the MGMT port and change the WAN IP to the new address.  Nothing is changing on the inside network.

 

 

 

 

 

 

 

1 ACCEPTED SOLUTION
Brash
Head in the Cloud
3 REPLIES 3
Brash
Head in the Cloud

BlakeRichardson
Kind of a big deal

Yes its as simple as changing via local status page. Make sure you have it enabled in your dashboard and then browser to the devices LAN IP. 

www.btr.net.nz
GreenMan
Meraki Employee

If your MX is using site-to-site VPN, check that it is configured for Automatic NAT traversal.    If it is set to manual, you may need to change the config, to reflect the new IP.   Chances are it will be automatic - that's the default and most people leave it that way

https://documentation.meraki.com/MX/Site-to-site_VPN/Site-to-Site_VPN_Settings#NAT_Traversal

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels