VPN of meraki Full stack

[ludwigbery]

Hi All,

can somebody enlighten me on my meraki for 2 sites? Below are the details;

for Main office (HUB already enabled)

1-MX84

3-MR33

1-MS

for branch (Spoke?)

1-MX64

2-MR 18

1-MS

if I enable the site-to-site VPN will all other meraki appliance be included with the VPN?

[Rebry]

Hi! The VPN you connect between your sites will only add the subnets you allow between the vpn connections.

If you have one subnet spanning all devices, then yes, all Meraki appliances will be included 😉

[AjitKumar]

Hi @ludwigbery 

I understand when we establish "Site-to-site" AutoVPN between two locations.

The Local Subnets (included In VPN) are exchanged and the devices belonging to these subnets can talk to each other.

[PhilipDAth]

You have to set at least one site to be a hub.  The second site can be either a hub or spoke.  Once you have done that they will built a VPN automatically.

[PhilipDAth]

This document explains the settings.

https://documentation.meraki.com/MX/Site-to-site_VPN/Site-to-site_VPN_Settings

[ludwigbery]

@Rebry 

@AjitKumar 

@PhilipDAth 

thank you so much for the inputs!