VPN of meraki Full stack

ludwigbery
Getting noticed

VPN of meraki Full stack

Hi All,

 

can somebody enlighten me on my meraki for 2 sites? Below are the details;

 

for Main office (HUB already enabled)

1-MX84

3-MR33

1-MS

 

for branch (Spoke?)

1-MX64

2-MR 18

1-MS

 

if I enable the site-to-site VPN will all other meraki appliance be included with the VPN?

5 REPLIES 5
Rebry
Here to help

Hi! The VPN you connect between your sites will only add the subnets you allow between the vpn connections.

If you have one subnet spanning all devices, then yes, all Meraki appliances will be included 😉
AjitKumar
Head in the Cloud

Hi @ludwigbery 

 

I understand when we establish "Site-to-site" AutoVPN between two locations.

The Local Subnets (included In VPN) are exchanged and the devices belonging to these subnets can talk to each other.

 

 

Regards,
Ajit
AjitsNW@gmail.com
www.ajit.network
PhilipDAth
Kind of a big deal
Kind of a big deal

You have to set at least one site to be a hub.  The second site can be either a hub or spoke.  Once you have done that they will built a VPN automatically.

 

 

ludwigbery
Getting noticed

@Rebry 

@AjitKumar 

@PhilipDAth 

 

thank you so much for the inputs!

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels