Unable to see all my clients on MX100

Solved
Ric_Uribe
Conversationalist

Unable to see all my clients on MX100

Hello,

I recently installed a MX100 on my network. The LAN portion of the MX sits on a VLAN2 and my users/clients are in another VLAN3 and there is a core switch that acts as the default gateway for the clients.

 

When I go to all network-wide\clients, all I see is the traffic coming from the switch, meaning all I see is the switch itself but I do not see any individual clients.  

 

How can I change the configuration to be able to see each device that uses the MX coming from the Switch from different VLANs?

 

Thank you

Ricardo U

1 Accepted Solution
jdsilva
Kind of a big deal

Under the Addressing & VLANs page you're going to want to change the "Client Tracking" setting to IP. 

 

image.png

View solution in original post

3 Replies 3
MarcP
Kind of a big deal

assuming the Core Switch is the dhcp server and behind your MX, thats why you won´t see the Clients and only the traffic from the Switch.

 

jdsilva
Kind of a big deal

Under the Addressing & VLANs page you're going to want to change the "Client Tracking" setting to IP. 

 

image.png

Ric_Uribe
Conversationalist

Thanks guys, that worked nicely.
Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels