Unable to connect MX68 behind MG51

Solved
jotfco
New here

Unable to connect MX68 behind MG51

Hi,

 

I've an MG51 with dual sim registered and reacheable from Meraki GUI.

II would like to connect it to the MX68 using the MG51 as GSM gateway to provide connectivity to the clients connected to theLAN ports of the MX68.

The MX68 is unable to register to my network on Meraki management page, it blinks and remain orange.

 

Following the schema:

 

MG51 (dual sim) in Passthrough mode, port 1 WAN to port 1 internet of MX68 , port 2 PoE to port 12Poe MX68

MX68 is in routed mode DHCP to release the address to the clients.

 

Can you help me? The MX68 is not registering to the cloud...

 

Thanks

 

 

1 Accepted Solution
ww
Kind of a big deal
Kind of a big deal

Mg port 1 should be connected to port 12 (poe)of mx

Only port 2 should provide data

https://documentation.meraki.com/MG/General_Configuration/MG_IP_Passthrough#MG_communication

View solution in original post

2 Replies 2
ww
Kind of a big deal
Kind of a big deal

Mg port 1 should be connected to port 12 (poe)of mx

Only port 2 should provide data

https://documentation.meraki.com/MG/General_Configuration/MG_IP_Passthrough#MG_communication

jotfco
New here

Thanks a lot!

Now it's working properly!!

 

Thanks!!

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels