Two MX64's but different config menus....

SOLVED
BlakeRichardson
Kind of a big deal
Kind of a big deal

Two MX64's but different config menus....

So I am dealing with two MX64's that are on different networks but under the same organisation. Both have advanced licensing and are on combined networks. One of the devices does not give me the option to configure a splash page or access control, the options are simply not there to select.

 

I doubt this is normal so I have opened a case BUT in case it is normal I thought I would ask here as well. If anyone has any ideas I would very much appreciate their help.

 

Thanks!

 

SMC Finance.pngSt Margarets College LAN.png

1 ACCEPTED SOLUTION
PhilipDAth
Kind of a big deal
Kind of a big deal

You can't use splash pages if you have Active Directory integration turned on.  Have you by chance got Active Directory integration enabled?

https://documentation.meraki.com/MX-Z/Access_Control_and_Splash_Page/Access_Control

View solution in original post

3 REPLIES 3
PhilipDAth
Kind of a big deal
Kind of a big deal

You can't use splash pages if you have Active Directory integration turned on.  Have you by chance got Active Directory integration enabled?

https://documentation.meraki.com/MX-Z/Access_Control_and_Splash_Page/Access_Control


@PhilipDAth wrote:

You can't use splash pages if you have Active Directory integration turned on.  Have you by chance got Active Directory integration enabled?

https://documentation.meraki.com/MX-Z/Access_Control_and_Splash_Page/Access_Control


that is a worthwhile reminder, thank-you.

Robin St.Clair | Principal, Caithness Analytics | @uberseehandel

You were spot on, thank for your help!
Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels