Swapped MX67W on orgs - Firmware now incorrect

SOLVED
Archulet
Conversationalist

Swapped MX67W on orgs - Firmware now incorrect

Client MX67W finally arrived and had to swap out from a temp MX67W.  I didn't update the firmware on the new one (lesson learned).  Upon swapping, the new MX67W (came up as 16.16 FW) when the old MX was on Firmware 17.10.  I was able to remedy the new MX to update properly, but the old MX is only recognized on the new org as having 16.16 version when I know it has the 17.10.  It won't upgrade this MX.  What can I do to remedy?

1 ACCEPTED SOLUTION
cmr
Kind of a big deal
Kind of a big deal

If you cannot upgrade it, log a support ticket and they can, though it often has to be real time while you are on the phone with them.

View solution in original post

3 REPLIES 3
cmr
Kind of a big deal
Kind of a big deal

If you cannot upgrade it, log a support ticket and they can, though it often has to be real time while you are on the phone with them.

Archulet
Conversationalist

Will do thank you.

PhilipDAth
Kind of a big deal
Kind of a big deal

The MX will upgrade/downgrade to match the network.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels