Static Routes on Meraki MX64 (Multiple Routes?)

[KostasX]

Hello,

I was wondering if we are able to add multiple (more than one) static routes on Cisco Meraki MX64.
It seems to have a limitation for only one static route under "Security & SD-WAN --> Configure --> Addressing & VLANs".
When i am trying to add more than one route here, i get only the option to update the already existing route (attached screenshot).

[AjitKumar]

Hi,

Certainly you can add multiple static route. The UI (User Interface) on the dashboard projects as if you are updating the Routing Table.

Screenshot attached for reference.

[KostasX]

Dear Ajit,

I have tried to add an extra static route and as soon as i pressed "Update" the new route replaces the old one instead of adding it as a new one. I don't get if i am doing something wrong (although it seems to be as simple as ever), or it is just some kind of bug or something like that.

[AjitKumar · Accepted solution]

Hi,

This seems to be strange.

I tried doing this again on my PC. I found no issues.

How about making sure about the following.

1. Create 1 Route at a Time. Save Changes. Refresh the page and try adding new Route.

2. Make sure while creating new route no check boxes are selected under Static Route.

3. Try using another browser / incognito mode of the browser.

Hope this helps.

[KostasX]

Is the 192.168.25.1 an IP address of a neighboring (connected) L3 device on your MX64 or is it assigned local on a port of your MX? I suppose that this IP belongs to a connected L3 device. Correct?

[AjitKumar]

Hi,

In my case 192.168.25.1 is the IP address of MX.

192.168.25.0/24 Subnet is a VLAN created on MX for LAN. (I was simply trying to replicate your case on the same box)

[KostasX]

I have tried from a different browser and it worked.

Never passed my mind to try this, but i didn't expect that i should any issues like that.

Thank you very much for your time.

[MarcP]

Always use chrome as Merakis uses Chrome for testing. As I heard on a meraki event.

[Carlo]

What browser are you using? I bet it was Firefox. I login with both Firefox and Chrome.

some pages have problem with Firefox and others with Chrome.

[KostasX]

I was using Google Chrome.

Tried and logged in from Firefox and it worked.

Afterwords when i tried again from Google Chrome, i was able to make changes from Chrome as well.

[MarcP]

Just tried it, getting the following errormessage:

######

There were errors in saving this configuration:

• The static LAN route "Test" has an invalid next hop IP. The IP address 10.0.1.1 is not on a configured subnet.
• The static LAN route "Test2" has an invalid next hop IP. The IP address 10.0.2.1 is not on a configured subnet.

######

So, seems like you have to add the subnets for the static routes first. In general, there was no problem in configureing, more than one static route.