Split Internet Speed between two vlans on MX64

Solved
MWRD
Conversationalist

Split Internet Speed between two vlans on MX64

Hi there, I have two different vlans on a MX64 and would like to split the bandwidth between the two vlans.

 

Thanks

1 Accepted Solution
alemabrahao
Kind of a big deal
Kind of a big deal

You can create a Group policy configuring traffic shaping and set this group policy on SVI. Check the documentation:

 

https://documentation.meraki.com/General_Administration/Cross-Platform_Content/Creating_and_Applying...

I am not a Cisco Meraki employee. My suggestions are based on documentation of Meraki best practices and day-to-day experience.

Please, if this post was useful, leave your kudos and mark it as solved.

View solution in original post

6 Replies 6
ww
Kind of a big deal
Kind of a big deal

They can both use the internet. 

You can limit the speed for each user.

You cant set a limit for each vlan

MWRD
Conversationalist

How do you set a limit for each vlan?

alemabrahao
Kind of a big deal
Kind of a big deal

You can create a Group policy configuring traffic shaping and set this group policy on SVI. Check the documentation:

 

https://documentation.meraki.com/General_Administration/Cross-Platform_Content/Creating_and_Applying...

I am not a Cisco Meraki employee. My suggestions are based on documentation of Meraki best practices and day-to-day experience.

Please, if this post was useful, leave your kudos and mark it as solved.
ww
Kind of a big deal
Kind of a big deal

If your question is per user in a vlan then what @alemabrahao posted

 

If your question is to limit the vlan itself. Then, You cant. The bw limits are for users.

alemabrahao
Kind of a big deal
Kind of a big deal

Here you can find more informations:

 

https://documentation.meraki.com/MX/Firewall_and_Traffic_Shaping/SD-WAN_and_Traffic_Shaping

https://documentation.meraki.com/MR/Firewall_and_Traffic_Shaping/Traffic_and_Bandwidth_Shaping

 

I am not a Cisco Meraki employee. My suggestions are based on documentation of Meraki best practices and day-to-day experience.

Please, if this post was useful, leave your kudos and mark it as solved.
IvanMA23
Here to help

Esas dos Vlan estan configuradas en el mismo MX??

Si es asi, podrias crear dos diferentes politicas de grupo y asi poder limitar el ancho de banda para cada una de ellas!!

Recuerda que una vez creadas las politicas de grupo debe de asiganarse dentro de la Vlan en Adressing & VLAN 

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels