Site to Site VPN's in Different Networks

SOLVED
DanielBHSNIT
Conversationalist

Site to Site VPN's in Different Networks

In my dashboard I have eight separate networks, all different geographic locations, all with MX64's.  I want to set up site-to-site VPN's on these but when I go to enable them, nothing shows up under Hub or Spoke.  Is there a way to do this or do I need to move everything under one network?  I'd prefer not to move anything right now.

1 ACCEPTED SOLUTION
ww
Kind of a big deal
Kind of a big deal

You need to make at least 1 device a hub. Then go to another network and make a spoke and select that hub

 

You could also make all networks hub if you want a full mesh setup.

 

If you networks are in different organizations then you cant use autovpn, but you could use 3rd party vpn

https://documentation.meraki.com/MX/Site-to-site_VPN/Site-to-Site_VPN_Settings

 

https://documentation.meraki.com/Architectures_and_Best_Practices/Cisco_Meraki_Best_Practice_Design/...

 

https://documentation.meraki.com/MX/Site-to-site_VPN/Configuring_Site-to-site_VPN_between_MX_Applian...

View solution in original post

3 REPLIES 3
ww
Kind of a big deal
Kind of a big deal

You need to make at least 1 device a hub. Then go to another network and make a spoke and select that hub

 

You could also make all networks hub if you want a full mesh setup.

 

If you networks are in different organizations then you cant use autovpn, but you could use 3rd party vpn

https://documentation.meraki.com/MX/Site-to-site_VPN/Site-to-Site_VPN_Settings

 

https://documentation.meraki.com/Architectures_and_Best_Practices/Cisco_Meraki_Best_Practice_Design/...

 

https://documentation.meraki.com/MX/Site-to-site_VPN/Configuring_Site-to-site_VPN_between_MX_Applian...

DanielBHSNIT
Conversationalist

I guess I'm not familiar enough (yet) about making 1 device a hub or making all networks a hub.  The networks are in the same organization just different networks.

Follow the links that @ww gave you.  They include step by step instructions.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels