SNORT IDS bypass vulnerability

DarrenOC
Kind of a big deal
Kind of a big deal

SNORT IDS bypass vulnerability

SNORT/IDS bypass vulnerability 

 

https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-snort-dos-9D3hJLuj

Darren OConnor | doconnor@resalire.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.
5 Replies 5
DarrenOC
Kind of a big deal
Kind of a big deal

If I read this correctly are we saying there’s no fix available if running MX v16.x till February?  And where it states Migrate to a fixed release....what is the fixed release?  

 

Are we expected to sit and cross our fingers till then?

 

UCcert_0-1642764183618.png

 

Darren OConnor | doconnor@resalire.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.
cmr
Kind of a big deal
Kind of a big deal

Also what is the MX250M...?

If my answer solves your problem please click Accept as Solution so others can benefit from it.
mlefebvre
Building a reputation

Is this implying that no fix is planned for 14 or 15, when 16 is not yet in GA? I sure hope that isn't the case

 

Also does this mean that 17 is NOT affected?

DarrenOC
Kind of a big deal
Kind of a big deal

Hi @mlefebvre , I think that’s the case. The only fix will be when the hot fix for 16.x is released in February.

 

I did raise a support ticket earlier today but haven’t had a response as yet. Also tried to call support but the call was dropped after being in a queue for 20+ minutes.

 

like yourself I was looking for clarification.

Darren OConnor | doconnor@resalire.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.
DarrenOC
Kind of a big deal
Kind of a big deal

@Ryan_Miles , @MerakiDave , @GreenMan 

 

Sorry to tag you all but are Meraki able to provide any further information or clarification here?

Darren OConnor | doconnor@resalire.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.
Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels