Revisiting the MDNS conversation MACOS UUID

JED2021
Getting noticed

Revisiting the MDNS conversation MACOS UUID

 

Like everyone else there is a concern regarding Mac clients  and the UUID.

 

100% or our Macbooks only use wireless.

 

I noticed that Mac Minis and when my Macbook is connected to an MS switch via ethernet the  Proper name appears in the dashboard.

 

Has anyone else discoved this?

Any ideas  if it is a MACOS wifi client issue or a knob in my SSID that needs to be turned?

 

Thank you

8 Replies 8
rhbirkelund
Kind of a big deal
Kind of a big deal

This is most likely due to Apple (and Android for that matter) is using randomised MAC addresses, https://documentation.meraki.com/General_Administration/Cross-Platform_Content/Meraki_and_iOS_14_MAC...

 

The only way around this is to disable randomised mac addresses on the client itself.

Or, if the Macs are enrolled in Systems Manager, you could push the setting out with a WiFi profile.

LinkedIn ::: https://blog.rhbirkelund.dk/

Like what you see? - Give a Kudo ## Did it answer your question? - Mark it as a Solution 🙂

All code examples are provided as is. Responsibility for Code execution lies solely your own.
JED2021
Getting noticed

The issue is on Macbooks (laptops) not Mobile devices.  The Mac address is not randomized.

Thank you

rhbirkelund
Kind of a big deal
Kind of a big deal

Are you sure? Afair, It's enabled by default on all Macbooks, and available to disable unless the device is MDM enrolled... I might be incorrect here, though..

LinkedIn ::: https://blog.rhbirkelund.dk/

Like what you see? - Give a Kudo ## Did it answer your question? - Mark it as a Solution 🙂

All code examples are provided as is. Responsibility for Code execution lies solely your own.
JED2021
Getting noticed

can you clarify Afair?  and what is enabled by default

rhbirkelund
Kind of a big deal
Kind of a big deal

Afair = As far as I recall..

 

I think that Private MAC address/MAC address randomisation is enabled by default on Apple Macs, and cannot be disabled unless the device en MDM enrolled, and a profile is pushed to it, to disable Private MAC address.

LinkedIn ::: https://blog.rhbirkelund.dk/

Like what you see? - Give a Kudo ## Did it answer your question? - Mark it as a Solution 🙂

All code examples are provided as is. Responsibility for Code execution lies solely your own.
JED2021
Getting noticed

I am searching for how to set this value outside of using the MDM.  Are you are of any CLI command line shell on MACOS?

JED2021
Getting noticed

our MDM is KANDJI.  They say the issue is how MERAKI orders the device identification.

The Device on LAN identifies correctly. MACOS host name

The Device on WIFI identifies as the UUID.

 

I believe this occurred either with the latest MACO OS upgrades or Migrating to KANDJI from JAMF

 

Has anyone else seen this LAN vs WIFI MACOS device identification for clients?

JED2021
Getting noticed

Kandji support states

 

One thing I did notice that may be a lead on why Meraki is reporting names/UUIDs improperly is that the first two computers you listed are running macOS 11 while the second set that you state show UUID on wifi are on macOS 12. I suggest following that thread with Meraki to see if there's some aspect there that is contributing to your scenario.
Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels