Replace MX60 by MX84

Solved
Ludo
Here to help

Replace MX60 by MX84

Hello,

 

I'm a real newbie on Meraki product and network. Actually i just monitor and make some simple firewall rules.

I need to replace our MX60 firewall with a MX84. Apart the basic doc of the installation of the MX84 i found nothing to help me.

Is there some docs that show how do this replacement step by step (in simple english or better in french !) ?

 

Thanks !

1 Accepted Solution
PhilipDAth
Kind of a big deal
Kind of a big deal

They'll transfer to the new device - but take some screen shots as a backup.

View solution in original post

6 Replies 6
PhilipDAth
Kind of a big deal
Kind of a big deal

Remove the existing MX60 from the network, and then add the new MX84 to that same network.

Ludo
Here to help

Ok, thanks, but i need to reconfigure all settings or the settings are automatically affected to the new device ?

PhilipDAth
Kind of a big deal
Kind of a big deal

They'll transfer to the new device - but take some screen shots as a backup.
Ludo
Here to help

Thanks, it's very easy in fact !
PhilipDAth
Kind of a big deal
Kind of a big deal

In a word, yes.
PhilipDAth
Kind of a big deal
Kind of a big deal

If you think I helped it would be great if you could give me some Kudos.
Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels