QOS rules can be configured under Security appliance > Configure > Traffic shaping. Please see the KB article below to create traffic-shaping rules. Also, linking VoIP FAQ KB in case you are interested in additional information for VoIP on Meraki devices.
If you're talking about outbound QoS on the MX appliance towards another location or the internet then you need to set this on the Security & SD-WAN -> traffic shaping page.
Then you need to add a rule where you match on your voice application or a L3/4 match criterium and set the DSCP value to 46 - EF. This will effectively put voice traffic on the realtime queue.
For example, in Security & SD-WAN -> traffic shaping. Add a new shaping rule Definition (All VoIP & Video conferencing, Bandwidth limit (Obey network per client limit), Priority (High), DSCP tagging (46 EF) will this configuration work?
QOS rules can be configured under Security appliance > Configure > Traffic shaping. Please see the KB article below to create traffic-shaping rules. Also, linking VoIP FAQ KB in case you are interested in additional information for VoIP on Meraki devices.
For example, in Security & SD-WAN -> traffic shaping. Add a new shaping rule Definition (All VoIP & Video conferencing, Bandwidth limit (Obey network per client limit), Priority (High), DSCP tagging (46 EF) will this configuration work?
Get notified when there are additional replies to this discussion.
