Meraki

Shubh3738 · ‎Feb 22 2024

Could you please help me, public ip showing different in configurations.

KarstenI · ‎Feb 22 2024

Some ISPs NAT the customer's public IP to a different public IP. This could be the case here.

If you found this post helpful, please give it Kudos. If my answer solves your problem, please click Accept as Solution so others can benefit from it.

View solution in original post

alemabrahao · ‎Feb 22 2024

Is the ISP modem connected directly to the MX? Is your IP dedicated?

Otherwise open a support case.

I am not a Cisco Meraki employee. My suggestions are based on documentation of Meraki best practices and day-to-day experience.

Please, if this post was useful, leave your kudos and mark it as solved.

DarrenOC · ‎Feb 22 2024

Hi @Shubh3738 , appreciate that you’ve masked your actual IP address but not masked the Gateway IP. Considering you’re probably on a /29 it wouldn’t be difficult to guess the actual IP. Might want to mask the lot.

Darren OConnor | doconnor@resalire.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.

KarstenI · ‎Feb 22 2024

Some ISPs NAT the customer's public IP to a different public IP. This could be the case here.

If you found this post helpful, please give it Kudos. If my answer solves your problem, please click Accept as Solution so others can benefit from it.

Meraki

Community

Public IP showing diffrent MX 64

Public IP showing diffrent MX 64