I've actually tested this and it does actually perform NAT translation over ALL Meraki and Non-Meraki VPNs. The only problem is you cannot NAT per VPN; it's all or none. In our case, we needed 1 3rd party VPN NAT'ed, but not the other, so it did not work out in our case.
Hi @KarstenI , yep, agree with that statement. Most recent firewall project we had to place a couple of ASAs back into the design for that very reason. Customers VPN requirements were varied and complex.
Darren O'Connor | uccert.co.uk https://www.linkedin.com/in/darrenoconnor/
I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.