- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Meraki MX84 - Client VPN with AD
Hi Meraki Community,
I'm just wondering if anyone guys have this case before, now I have a Meraki Cloud Authentication Method to authenticate the Client VPN users, and I want to change the authentication method to AD, but my question is can I do this and keep using the email address as username from client-side.
I have My AD and Exchange in Azure, we don't host our Emails with a third party.
I know we can strip the suffix if we use RADIUS, but there is no Radius in our future setup.
Hope a great day for all
Thanks,
Omar
Solved! Go to solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Omar.
I implemented AD Authentication recently on my MX84. It must be the sAMAccountName.
I searched a while about that. I don't remember where i found the answer but on this page you can see than the MX search by their sAMAccountName.
Regards,
Jimmy.
- If the bind is successful, the MX/MR searches the directory for the user logging in by their sAMAccountName attribute. If a match is found, the DN of the user is returned to the MX/MR.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Omar.
I implemented AD Authentication recently on my MX84. It must be the sAMAccountName.
I searched a while about that. I don't remember where i found the answer but on this page you can see than the MX search by their sAMAccountName.
Regards,
Jimmy.
- If the bind is successful, the MX/MR searches the directory for the user logging in by their sAMAccountName attribute. If a match is found, the DN of the user is returned to the MX/MR.
