Meraki MX Design & Config

SOLVED
Raji
Here to help

Meraki MX Design & Config

What is the protocal begin used for to build the tunnel in MX devices ? and how tunnel co-relation are there or how many tunnels we can build over MX security series devices ?.

1 ACCEPTED SOLUTION
ww
Kind of a big deal
Kind of a big deal

You can take a look at the meraki autovpn whitepaper

https://meraki.cisco.com/product-collateral/auto-vpn-whitepaper/

 

Also check the sizing guide for recommended tunnel count

https://meraki.cisco.com/product-collateral/mx-sizing-guide/

 

View solution in original post

4 REPLIES 4
ww
Kind of a big deal
Kind of a big deal

You can take a look at the meraki autovpn whitepaper

https://meraki.cisco.com/product-collateral/auto-vpn-whitepaper/

 

Also check the sizing guide for recommended tunnel count

https://meraki.cisco.com/product-collateral/mx-sizing-guide/

 

Raji
Here to help

Thank you for sharing this.

DarrenOC
Kind of a big deal
Kind of a big deal

Just to follow on from @ww ’s awesome reply - the number of tunnels will depend on your design.  Are you looking for full mesh (hub) or site to site (spoke)?

 

The calculations to work out each can be found in the below document 

 

https://documentation.meraki.com/Architectures_and_Best_Practices/Auto_VPN_Hub_Deployment_Recommenda...

Darren OConnor | doconnor@resalire.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.

Thank you for sharing this document.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels