MX95 - Enable backup WAN on port 3

Solved
Francisco_M
Conversationalist

MX95 - Enable backup WAN on port 3

Hi

On a MX95 if I "Enable backup WAN on port 3" does that mean I can have WAN 1 as primary and then two backups (WAN 2 & 3)?

Yes, that is what I'm looking to do.  Have one primary and two backups.

 

Thanks

1 Accepted Solution
Mloraditch
Kind of a big deal

This is a tertiary backup and does not support all features. See here: https://documentation.meraki.com/MX/MultiWAN_Backup_Uplink

If you found this post helpful, please give it Kudos. If my answer solves your problem please click Accept as Solution so others can benefit from it.

View solution in original post

3 Replies 3
Mloraditch
Kind of a big deal

This is a tertiary backup and does not support all features. See here: https://documentation.meraki.com/MX/MultiWAN_Backup_Uplink

If you found this post helpful, please give it Kudos. If my answer solves your problem please click Accept as Solution so others can benefit from it.
Francisco_M
Conversationalist

Perfect, exactly what I was looking for.

 

Thanks

Edu_Chico
Here to help

You can have WAN3 but it can only be used if WAN 1 and WAN 2 are down, that is, you cannot balance between the 3 WANs.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco ID. If you don't yet have a Cisco ID, you can sign up.
Labels