Helloa, i want to deploy a Meraki solution in high availability on AWS, and we cannot find the correct configuration on AWS and the Meraki console. We have followed these URLs without satisfactory results: https://aws.amazon.com/es/quickstart/architecture/cisco-meraki-vmx/ https://aws-quickstart.github.io/quickstart-cisco-meraki-sd-wan-vmx/ https://fwd.aws/6aN9v? <-- CloudFormation   We have 6 accounts, each with its own VPC, all connected with a Transit Gateway (1). The ranges used are within the supernet 10.111.0.0/18.   Using the CloudFormation from the link, we created a new VPC with the address 10.111.52.0/24. We divided this VPC into 4 subnets /26, 2 public where we deployed the Merakis, and 2 private. This VPC has a Transit Gateway (2).   At the moment we are only testing with the network 10.111.52.0/24. When the Merakis are working, we want to do a peering between Transit Gateway (1) and Transit Gateway (2). In the route table of Transit Gateway (1), we want to put that all the 10.0.0.0/8 traffic goes to Transit Gateway (2) and this sends it through the VPN via the Merakis.   In the Meraki console, we have created 2 sites. We configured both sites as a Site-to-site VPN of the Hub type. In Local Networks, we configured the network 10.111.52.0/24. Is this configuration correct?   We have deployed the CloudFormation, https://fwd.aws/6aN9v?, and we have a question about the "Meraki organization API key". Does it need write permissions, or is read-only sufficient? In the logs of the lambda "vMXTransitGatewayRTLambd" created by the CloudFormation, we see the following error:   -------------------------------------- [ERROR]              2024-06-10T15:24:55.943Z                        Exception: Meraki API key needs to be defined Traceback (most recent call last):   File "/var/task/lambda_function.py", line 240, in main     update_rt()   File "/var/task/lambda_function.py", line 195, in update_rt     meraki_dashboard = meraki.DashboardAPI(meraki_api_key, suppress_logging=True)                        ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^   File "/var/task/meraki/__init__.py", line 68, in __init__     raise APIKeyError() meraki.exceptions.APIKeyError: Meraki API key needs to be defined -------------------------------------- ... View more

hello everyone, On my MX67 it is frequently switching from wan1 to wan2, affecting network performance. The wan1 provider tells me that there are no problems on its network and it does not lose packets. However, it doesn't stop switching. Any idea what could happen? any bug?     FIRMWARE Update available Current version: MX 18.107.2           ... View more