Hi
Will this known issue ever be fixed?
After making some configuration changes on MX84 appliances, a brief period of packet loss may occur. This will affect all MX84 appliances on all MX firmware versions
//Daniel
I would be very interested to know this as well. Based on some digging I did, it's been a known issue since 2018.
Yes it’s anoying
Hello @Banfield75
There are a couple of bugs that were fixed in MX14.45 firmware. Referring to the specific 'Packet Loss on a config change' bug, the MX has to apply the routing and switching changes and this used to cause a small blip in the user traffic. Unless there is a drastic change like Pass through to Routed mode or Adding a new VLAN, there should be no user visible impact.
If you would like us to take a look at your specific MX, please go ahead and open a support case. If support case is already opened, let me know the ticket number. I can check the notes. This needs live troubleshooting to monitor the internal logs while the change is being made.
Please let me know if you have any questions.
Regards,
Meraki Team
Firmware 15.24 and 15.25 no longer mention this issue, has it been fixed or is it no longer deemed to affect the vast majority of users?
Both the bugs I was talking about have been resolved in 14.45 or later released versions. So, 15.24 and 15.25 have the fix through one of the earlier versions and that is why it has not been specifically mentioned in the latest releases.
Let me know if you have any questions.
Regards,
Meraki Team
The packet loss issue after config changes is causing us issues mainly with our phones that might be a bit too sensitive to packet loss but will this issue be fixed?
I see it’s still listed as a known issue even on the latest beta 15.33