MX84 and LACP

Solved
JSA
Conversationalist

MX84 and LACP

I have 1 MX84 and 2 downstream Huawei switches - is LACP still unsupported on the MX ?

1 Accepted Solution
PhilipDAth
Kind of a big deal
Kind of a big deal

3 Replies 3
PhilipDAth
Kind of a big deal
Kind of a big deal

Correct.

JSA
Conversationalist

Thanks Philip.

Therefore, the proper way is to have 2 units of MX84s - each connected to one downstream core switch which is configured in a HA setup ?

Bruce
Kind of a big deal

Since you talk about using LACP I assume the two Huawei switches are stacked. If this is the case then make a connection to each switch so that if one switch fails a connection to the other will still exist. The Huawei switches must be running spanning-tree, and one of the ports on the Huawei stack will get put into blocking state - the MX doesn’t participate in spanning-tree, it just forwards BPDUs. Hope this helps.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels