MX68CW - Maximum WAN troughput

RaphaelL
Kind of a big deal
Kind of a big deal

MX68CW - Maximum WAN troughput

Hi ,

 

I'm using a MX68CW at home.

My wan speeds are 1G/1G on a fiber link.

 

RaphaelL_0-1678366721601.png

 

I only have a couple vlans and no security features at all , so I should be maxed out by the  Stateful firewall throughput of 600Mbps ( which is probably a safe value determined by Meraki and not really the limit of the hardware )

 

However , when doing multiple speed tests I can achieve speeds way higher than that :

 

Shaping 600/600

RaphaelL_1-1678366817055.png

 

Shaping 599/599 ( maximum - 1 )

RaphaelL_2-1678366962073.png

What is the highest value that you guys are hitting with a MX68 ?

 

Also the maximum of the trafic shapping slider is 600/600. Which I guess that if the slider is set to the maximum , it really means = unlimited and not a capped value like the dashboard shows.

That behavior is not mentioned in https://documentation.meraki.com/MX/Firewall_and_Traffic_Shaping/SD-WAN_and_Traffic_Shaping

 

Running MX.18.106. Same behavior seen on MX16.16

 

Thanks !

2 REPLIES 2
ww
Kind of a big deal
Kind of a big deal

Got around 1Gbit at some point using iperf directly on lan to wan ports. 

https://community.meraki.com/t5/Security-SD-WAN/MX67-WAN-Speed-Increased/m-p/145047/highlight/true#M...

RaphaelL
Kind of a big deal
Kind of a big deal

I'm hiting 740/800 with MX18.106 which is kinda nice but really over the specs !

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels