MX68CW | Appliance Type Network | Configuring SSID

[Kulraj]

There are options available to Enable/Disable SSIDs 1, 2, 3, and 4.
Is there any endpoint that can be used to configure SSID in an Appliance Type Network?
Any Insights Appreciated.

[PhilipDAth]

Under Security Appliance/Wireless.

[Kulraj]

Hi PhilipDAth
Thanks for reply, if this is the path of configuring SSID through the UI, then actually I already know that.
I wanted to find an endpoint that can be used to do it while using it as an API

[Inderdeep]

@Kulraj : Check this out 

https://documentation.meraki.com/MR/WiFi_Basics_and_Best_Practices/Enabling%2C_Disabling%2C_and_Chan...

[Kulraj]

Hi @Inderdeep @PhilipDAth 
Thank you both for the reply
I think the solutions both of you gave are configuring it from the UI, actually I know the configuring SSID from the Meraki Portal, but I was trying to find an endpoint which can do the same when using meraki API.
I already know https://developer.cisco.com/meraki/api-v1/#!get-network-wireless-ssids but this only works for Wireless Network Type, Is there any that can be used to do it from the Appliance Network Type.