MX68CW | Appliance Type Network | Configuring SSID

Kulraj
Here to help

MX68CW | Appliance Type Network | Configuring SSID

There are options available to Enable/Disable SSIDs 1, 2, 3, and 4.
Is there any endpoint that can be used to configure SSID in an Appliance Type Network?
Any Insights Appreciated.

4 REPLIES 4
PhilipDAth
Kind of a big deal
Kind of a big deal

Under Security Appliance/Wireless.

Hi PhilipDAth
Thanks for reply, if this is the path of configuring SSID through the UI, then actually I already know that.
I wanted to find an endpoint that can be used to do it while using it as an API

Inderdeep
Kind of a big deal
Kind of a big deal

@Kulraj : Check this out 

https://documentation.meraki.com/MR/WiFi_Basics_and_Best_Practices/Enabling%2C_Disabling%2C_and_Chan...

 

Regards/Inder
Cisco IT Blogs awarded in 2020 & 2021
www.thenetworkdna.com

Hi @Inderdeep @PhilipDAth 
Thank you both for the reply
I think the solutions both of you gave are configuring it from the UI, actually I know the configuring SSID from the Meraki Portal, but I was trying to find an endpoint which can do the same when using meraki API.
I already know https://developer.cisco.com/meraki/api-v1/#!get-network-wireless-ssids but this only works for Wireless Network Type, Is there any that can be used to do it from the Appliance Network Type.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels