MX65 keep going unreachable

kishan
Getting noticed

MX65 keep going unreachable

There are two MX65 at site second one is configured as a spare/warm device for device redundancy purpose. 

Primary is working fine no issue but spare one is keep going unreachable every 30 minutes or an hour then it came online for couple of minutes and went offline again.

Troubleshoot done: Checked upstream link, DNS server verified, 

Note: both of the MX firmware is not up to date yet.

 

Can someone please suggest what troubleshoot steps I need to do?

6 Replies 6
Inderdeep
Kind of a big deal
Kind of a big deal

@kishan : VPN Concentrator/Passthrough Mode or Routed mode ?

Regards/Inder
Cisco IT Blogs awarded in 2020 & 2021
www.thenetworkdna.com
kishan
Getting noticed

Its routed mode on MAC address tracking and single LAN configured.

Inderdeep
Kind of a big deal
Kind of a big deal

@kishan : did that below ?

Inderdeep_0-1621988283087.png

 

 

Regards/Inder
Cisco IT Blogs awarded in 2020 & 2021
www.thenetworkdna.com
kishan
Getting noticed

No its not came as a active but as "Ready". Lan connectivity is fine cause primary is works fine.

PhilipDAth
Kind of a big deal
Kind of a big deal

When it is unreachable access the local status page and see what it is reporting as the issue.

https://documentation.meraki.com/General_Administration/Tools_and_Troubleshooting/Using_the_Cisco_Me... 

kishan
Getting noticed

Have not done this but we will do it on site later thank you.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels