MX64 flashing orange

Solved
alex11
Conversationalist

MX64 flashing orange

MX64 was working fine for the whole year. Then I moved to a different place and then reconnected MX64, it starts to flashing orange (NOT SOLID, it blinks) no matter what I do. 

 

There is no documentation on flashing orange for MX. Any help?

1 Accepted Solution
Ryan_Miles
Meraki Employee
Meraki Employee

You should open a Support case. Might be something more than just internet reachability issue. 

Ryan

If you found this post helpful, please give it Kudos. If my answer solves your problem please click Accept as Solution so others can benefit from it.

View solution in original post

3 Replies 3
ww
Kind of a big deal
Kind of a big deal

I think its searching for internet.

 

Are you able to check/login on the local status page to see the status?

 

Does the mx have a ip? Is the mx wan set for dhcp or did you have static ip before?

 

If you use that cable from the wan1 and use it on a laptop do you have internet?

 

alex11
Conversationalist

Thanks for the tips. I think it stucks on booting and non of the ports works (the indicator doesn't light on), tested with a different ethernet cable.

will open a supp case

Ryan_Miles
Meraki Employee
Meraki Employee

You should open a Support case. Might be something more than just internet reachability issue. 

Ryan

If you found this post helpful, please give it Kudos. If my answer solves your problem please click Accept as Solution so others can benefit from it.
Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels