Hi everyone,
Yesterday morning I started to have an issue with Meraki VPN that would keep dropping our users from the VPN very frequently during the day.
Today morning, I kept receiving the same complaints so far.
I called my ISP and asked them if there could be anything going on with our modem, but after checking that from their end they confirmed that everything was fine with the modem.
We also have another firewall from a different brand connected to the same modem and that VPN is not dropping at all.
Yesterday, after the issue started to happen, I updated MX64 to the latest firmware version, but it hasn't made any change.
I opened a case with Meraki support but they are focusing as if the issue is with our workstations asking if we updated the computers recently.
From my perspective, everything points out to the MX64 being the cause of the issue.
What I noticed checking Meraki's event log this morning was that I started to have a lot of "Events dropped" logs entries yesterday and today.
I checked in the event log for prior occurrences of those messages and had just a couple of those in the last 4 years or so.
That way I believe those can be related to the issue I'm having.
Right now, I'm still trying to get some useful help from Meraki but decided to check if anyone in this group could help me as well.
Did anyone have any issue with that before?
Thanks,
Carlos
UPDATE:
What ended up working for us so far (it's been almost 1.5 days with no reported VPN disconnection) was to shut down our internet modem then the Meraki MX64, disconnect the cables, spray some compressed air in the connection inputs on both pieces of equipment, then turn everything on.
After that, we haven't seen any "Events dropped" entries in the logs and no complaints about VPN drops anymore.