cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

MX64 Secondary DMZ

New here

MX64 Secondary DMZ

Hey All,

 

I have a question regarding the capabilities of a MX64. On the site it says that it is capable of creating a DMZ. Is it also possible to create 2 DMZ networks and a LAN network. And where can i set this up?

 

And is it possible to route traffic based on the URL that is chosen?

 

Thanks in advance,

 

Jeroen

 

 

2 REPLIES 2
Kind of a big deal

Re: MX64 Secondary DMZ

This article has the instruction on configuring the DMZ.  https://documentation.meraki.com/MX-Z/Firewall_and_Traffic_Shaping/Creating_a_DMZ_with_the_MX_Securi...

 

Routing for things is destination based so you'd have some control over that. 

Adam R MS | CISSP, CISM, VCP, MCITP, CCNP, ITILv3, CMNO
If this was helpful click the Kudo button below
If my reply solved your issue, please mark it as a solution.
Kind of a big deal

Re: MX64 Secondary DMZ

A DMZ is effectively just another VLAN.  In Meraki these must use private IP addresses, and you have to NAT any public IP address and/or port through to the internal device.

Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.