MX64 Secondary DMZ

JeroenK
New here

MX64 Secondary DMZ

Hey All,

 

I have a question regarding the capabilities of a MX64. On the site it says that it is capable of creating a DMZ. Is it also possible to create 2 DMZ networks and a LAN network. And where can i set this up?

 

And is it possible to route traffic based on the URL that is chosen?

 

Thanks in advance,

 

Jeroen

 

 

2 REPLIES 2
Adam
Kind of a big deal

This article has the instruction on configuring the DMZ.  https://documentation.meraki.com/MX-Z/Firewall_and_Traffic_Shaping/Creating_a_DMZ_with_the_MX_Securi...

 

Routing for things is destination based so you'd have some control over that. 

Adam R MS | CISSP, CISM, VCP, MCITP, CCNP, ITILv3, CMNO
If this was helpful click the Kudo button below
If my reply solved your issue, please mark it as a solution.
PhilipDAth
Kind of a big deal
Kind of a big deal

A DMZ is effectively just another VLAN.  In Meraki these must use private IP addresses, and you have to NAT any public IP address and/or port through to the internal device.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels