MX support multiple links to a switch without looping?

SOLVED
Qing
Getting noticed

MX support multiple links to a switch without looping?

Because MX doesn't support LAG, so can connect two links between a MX and a switch? like switch spanning tree to block one link? Anyone please advise, thanks in advance. 

1 ACCEPTED SOLUTION
jdsilva
Kind of a big deal

@Qing , the MX will pass STP, so if you connect two links between an MS and an MX the MS will block one of the links because it sees its own BPDU.

View solution in original post

4 REPLIES 4
BrechtSchamp
Kind of a big deal

@BrechtSchamp they have even udated the documentation to use the method I was recommending in that article.

 

https://documentation.meraki.com/MX/Deployment_Guides/MX_Warm_Spare_-_High_Availability_Pair#Recomme...

jdsilva
Kind of a big deal

@Qing , the MX will pass STP, so if you connect two links between an MS and an MX the MS will block one of the links because it sees its own BPDU.

Qing
Getting noticed

Thanks a lot for everyone's kind reply. 

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels