cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

MX cluster without lan

New here

MX cluster without lan

Hi all

 

Can meraki cluster works with 2 wan interface and no lan connection?

 

I'd like to configure the Meraki cluster in a datacenter as AutoVpn Hub and non meraki site to site vpn.

 

BR

 

8 REPLIES 8
Kind of a big deal

Re: MX cluster without lan

Kind of a big deal
Kind of a big deal

Re: MX cluster without lan

the lan port(s) of both  mx need to send/receive  vrrp  packets using a layer2 link.   

New here

Re: MX cluster without lan

Hi

 

thanks for the reply, but i need to wan ( one Internet and one Mpls ). In passthrough i can use only one arm configuration, is it right?

 

BR

 

Paolo

Kind of a big deal

Re: MX cluster without lan

Kind of a big deal

Re: MX cluster without lan

@PaoloBiagioni What you're trying to do is not a recommended topology. I'd advise you rethink your design to better align with Meraki recommendations. 

Kind of a big deal
Kind of a big deal

Re: MX cluster without lan

@jdsilva he was asking about 2 wan port "mode" so i asumed  routed mode

Kind of a big deal

Re: MX cluster without lan

@ww OK yeh that was a fair assumption 🙂

Head in the Cloud

Re: MX cluster without lan

Hi @PaoloBiagioni, what are your goals with the solution? Are you looking to provide SD-WAN type functionality between sites, or are you looking to achieve a VPN back-up to an MPLS link? Depending on what you are trying to achieve there are different designs. And when you talk about internet and MPLS circuits, do you have single circuits, or do you have one circuit of each per MX?

Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.