MX Warm Spare Implementation

[Itransform]

Hi Guys,

I am working on a setup attached a planned connectivity diagram, I am a query MX Warm Spare HA(Active-Passive) implementation.

I have a single router from ISP which will provide /29 Public IP, Now i want to connect MX Box to implement Warm spare, can i deploy warm spare HA with single router.

If someone pls guide here.

I can get 2port from ISP Router to connect MX Box.

[ww]

Yes. That works.

Also note that the recommended setup is not a direct connection between the mx lan ports, but using the switch layer

https://documentation.meraki.com/MX/Deployment_Guides/MX_Warm_Spare_-_High_Availability_Pair#Recomme...

[Itransform]

Thanks for the reply, So Just a confirmation, Will it be similar to below shown connectivity.

[alemabrahao]

Like this:

You don't need a stack switch but the MX LAN ports should be connected to the switch not directly connected.