MX Notification on secondary internet link goes down

SOLVED
RichardChen1
Getting noticed

MX Notification on secondary internet link goes down

Hi Everyone,

 

I'm new to this community.

My company is building a managed service based on the building meraki dashboard monitoring/alerting features.

 

After reading the docos, it seems that the alert only supports "The primary uplink status changes".

 

How do can the system alert me if the secondary/standby link goes down?

 

 

Regards

Richard

1 ACCEPTED SOLUTION
PhilipDAth
Kind of a big deal
Kind of a big deal

Alas there is no loss for detecting WAN2 failure.

 

Your would need to use an script and call an API like:

https://dashboard.meraki.com/api_docs#return-the-uplink-loss-and-latency-for-every-mx-in-the-organiz...

 

If loss is 100% you can consider it down.

View solution in original post

3 REPLIES 3
PhilipDAth
Kind of a big deal
Kind of a big deal

Alas there is no loss for detecting WAN2 failure.

 

Your would need to use an script and call an API like:

https://dashboard.meraki.com/api_docs#return-the-uplink-loss-and-latency-for-every-mx-in-the-organiz...

 

If loss is 100% you can consider it down.
AjitKumar
Head in the Cloud

Hi Richard

I understand this shall not be possible.

However check the following thread.

 

https://community.meraki.com/t5/Security-SD-WAN/Monitoring-converted-WAN-2-port/m-p/9901#M2442

 

WANkiller has Suggested a work around. Not sure if you will be interested though.

 

 

Regards,
Ajit
AjitsNW@gmail.com
www.ajit.network
Uberseehandel
Kind of a big deal


@RichardChen1 wrote:

 

 . . . My company is building a managed service based on the building meraki dashboard monitoring/alerting features.

 

 

How do can the system alert me if the secondary/standby link goes down?


As this is to be part of a managed services offering, you won't mind diving into the API. Cisco DEVNET hosts the  Meraki Developer Hub, you will find it helpful.

Robin St.Clair | Principal, Caithness Analytics | @uberseehandel
Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels