MX 84 only traffic and report collection

[Sudhir]

Hi Team,

pls help with the solution on MX Report

my client has firewall Cyberom, no he don't to replace the with any other Firewall,

the only thing he want is that reporting from MX 

so we have placed the MX84 in the lan connectivity (Pls refer diagram) attached

i want only traffic details on my Meraki BOX

Pls let me know if required more details

Rgd

[kYutobi]

I don't think it's possible.

[BrechtSchamp]

It's not going to record traffic that is not going through the device. This won't work.

[kYutobi]

@BrechtSchamp is right as I have tried this before and it didn't work.

[ww]

how about using passthrough mode?

https://documentation.meraki.com/MX/Networks_and_Routing/Passthrough_Mode_on_the_MX_Security_Applian...

[AjitKumar]

Hi @Sudhir 

I understand in your scenario the best possible method could be integrating the MX in "Transparent Mode" as suggested by @ww .

When in passthrough mode, the MX is best used for in-line:

• Layer 3/7 firewall rules, traffic shaping, and analysis
• Network asset discovery and reporting
• Intrusion detection
• Security and content filtering
• Client and site-to-site VPN

[Sudhir]

Hi Ajith,

if we use this MX in pass through mode will we get below details, pls confirm

When in passthrough mode, the MX is best used for in-line:

• Layer 3/7 firewall rules, traffic shaping, and analysis
• Network asset discovery and reporting
• Intrusion detection
• Security and content filtering
• Client and site-to-site VPN

Rgds/Sudhir