MX-68 POE+ port

SOLVED
SopheakMang
Building a reputation

MX-68 POE+ port

Dear Expert ,

 

i understand that MX-68 has one port is POE+ ,

 

Could i use that port to provide Power to Meraki AP  ?

 

if can , any additional config on that port , or just plug and play ?

 

Thanks

1 ACCEPTED SOLUTION
KRobert
Head in the Cloud

Yes, You can support the MR AP on that port. I have this setup in multiple locations. 

 

Just enable the port and it is ready to go!

CMNO, CCNA R+S

View solution in original post

7 REPLIES 7
KRobert
Head in the Cloud

Yes, You can support the MR AP on that port. I have this setup in multiple locations. 

 

Just enable the port and it is ready to go!

CMNO, CCNA R+S
SopheakMang
Building a reputation

Dear bro ,
Just to confirm , no extra config right ? , Just turn on the port , then done ?

Correct. No extra configurations.

CMNO, CCNA R+S
SopheakMang
Building a reputation

Thank so much bro ,
rwiesmann
A model citizen

The MX-68 has 2 POE+ Ports, see Datasheet:

https://meraki.cisco.com/products/appliances/mx68

 

As I know can you power the Meraki AP's.

See as a sample the datasheet of the MR56 (Power):

https://documentation.meraki.com/MR/MR_Overview_and_Specifications/MR56_Datasheet#802.11ax.2C_802.11...

 

rgds

roger

The MX68 with two MR33 or two MR20 is my "Covid 19 CEO At Home, wants WiFi in loads of places" solution of choice.

 

The inclusion of the PoE ports are a great idea, i would simply love if one on the MX67 had been PoE too. Im not a fan of the MX##W's as the WiFi options are not as comprehensive.

SopheakMang
Building a reputation

You are right bro!!!
Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels