Dear Expert ,
i understand that MX-68 has one port is POE+ ,
Could i use that port to provide Power to Meraki AP ?
if can , any additional config on that port , or just plug and play ?
Thanks
Solved! Go to solution.
Yes, You can support the MR AP on that port. I have this setup in multiple locations.
Just enable the port and it is ready to go!
Yes, You can support the MR AP on that port. I have this setup in multiple locations.
Just enable the port and it is ready to go!
Dear bro ,
Just to confirm , no extra config right ? , Just turn on the port , then done ?
Correct. No extra configurations.
The MX-68 has 2 POE+ Ports, see Datasheet:
https://meraki.cisco.com/products/appliances/mx68
As I know can you power the Meraki AP's.
See as a sample the datasheet of the MR56 (Power):
rgds
roger
The MX68 with two MR33 or two MR20 is my "Covid 19 CEO At Home, wants WiFi in loads of places" solution of choice.
The inclusion of the PoE ports are a great idea, i would simply love if one on the MX67 had been PoE too. Im not a fan of the MX##W's as the WiFi options are not as comprehensive.