cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

LTE USB modem as a backup

SOLVED
peto
Getting noticed

LTE USB modem as a backup

Hi,

I would like to use LTE USB modem as a backup solution. Is it possible to have the cellular link offline (no communication toward the dashboard) when the primary connection is up and running so it doesn't consume the data plan of the SIM?

 

thank you

1 ACCEPTED SOLUTION

Accepted Solutions
bmehta
Meraki Employee

Re: LTE USB modem as a backup

Hello,
For Cellular to report as a backup on the dashboard it would need some amount of data to be sent to the dashboard. There is no offline mode I would say. However, the amount of data used for cellular as a backup is not very high.

View solution in original post

6 REPLIES 6
PhilipDAth
Kind of a big deal

Re: LTE USB modem as a backup

I typically allow for the cellular modem to use 100MB of data per month.

PhilipDAth
Kind of a big deal

Re: LTE USB modem as a backup

Also the cellular link does stay offline most of the time when it is not in use, but I would still allow for 100MB of traffic.

peto
Getting noticed

Re: LTE USB modem as a backup

the thing is that the carrier offers Internet for a day - 10GB for 1€. So when the primary line is up no traffic cannot be seen on cellular link 

bmehta
Meraki Employee

Re: LTE USB modem as a backup

Hello,
For Cellular to report as a backup on the dashboard it would need some amount of data to be sent to the dashboard. There is no offline mode I would say. However, the amount of data used for cellular as a backup is not very high.

View solution in original post

peto
Getting noticed

Re: LTE USB modem as a backup

OK, thank you.

And how about this solution. I have a raspberry pi connected to the LAN. Let's say I configure some test probe on it and when it fails, the raspberry sends some API message directly to MX. Is it supported? Or API is dashboard only.

PhilipDAth
Kind of a big deal

Re: LTE USB modem as a backup

>the raspberry sends some API message directly to MX. Is it supported? Or API is dashboard only.

 

Dashboard only.

Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.