Is it possible to point client VPN connections to WAN 2 in MX84?

ShadowoftheD
Here to help

Is it possible to point client VPN connections to WAN 2 in MX84?

Hi,

 

 

Is it possible to direct remote access VPN connections to WAN2? 

 

can't seem to find it any on the settings for client vpn.

 

Thanks

3 Replies 3
PhilipDAth
Kind of a big deal
Kind of a big deal

It uses whatever you have configured as the primary uplink under "Secure & SD-WAN/SD-WAN & Traffic Shaping".

ShadowoftheD
Here to help

thanks. but this also affects my site to site vpn connection as well right? like i.e. they'll have to peer with WAN2 now?

thanks
Richard_W
A model citizen

So as I discovered, yes, if as @PhilipDAth , mentioned you have primary uplink set to WAN2. Unfortunately it does not behave as AutoVPN does.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels