cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Is it possible to point client VPN connections to WAN 2 in MX84?

Highlighted
Here to help

Is it possible to point client VPN connections to WAN 2 in MX84?

Hi,

 

 

Is it possible to direct remote access VPN connections to WAN2? 

 

can't seem to find it any on the settings for client vpn.

 

Thanks

3 REPLIES 3
Highlighted
Kind of a big deal

Re: Is it possible to point client VPN connections to WAN 2 in MX84?

It uses whatever you have configured as the primary uplink under "Secure & SD-WAN/SD-WAN & Traffic Shaping".

Highlighted
A model citizen

Re: Is it possible to point client VPN connections to WAN 2 in MX84?

So as I discovered, yes, if as @PhilipDAth , mentioned you have primary uplink set to WAN2. Unfortunately it does not behave as AutoVPN does.

Highlighted
Here to help

Re: Is it possible to point client VPN connections to WAN 2 in MX84?

thanks. but this also affects my site to site vpn connection as well right? like i.e. they'll have to peer with WAN2 now?

thanks
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.