cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Include an exception in a Syslog Server

SOLVED
Highlighted
Here to help

Include an exception in a Syslog Server

Hello All,

I'm configuring a Syslog Server in a MX64 to log URLs accessed by the clients, but I need to exclude one specific host from this. Is it possible?

 

Ex.: I want to log all URLs accessed by my LAN (10.0.0.0/24, for instance), except the host that have the IP 10.0.0.10.

 

I have enabled the Syslog Server in Network-Wide -> General - Logging, putting the IP of my Syslog Server and choosing the Role "URL". But, I coudn't find any way to prevent a client to have its URLs access logged.

 

Thanks in advanced!

 

Regards,

Guilherme Carvalho

1 ACCEPTED SOLUTION

Accepted Solutions
Kind of a big deal

Re: Include an exception in a Syslog Server

AFAIK there's no way to filter what messages are sent. You likely will have to filter this out on the Syslog server side. 

View solution in original post

4 REPLIES 4
Kind of a big deal

Re: Include an exception in a Syslog Server

AFAIK there's no way to filter what messages are sent. You likely will have to filter this out on the Syslog server side. 

View solution in original post

Highlighted
Kind of a big deal

Re: Include an exception in a Syslog Server

I was thinking the same as @jdsilva

 

You'll just have to disclude or filter out the IP on the Syslog server side. 

 

Adam R MS | CISSP, CISM, VCP, MCITP, CCNP, ITILv3, CMNO
If this was helpful click the Kudo button below
If my reply solved your issue, please mark it as a solution.
Highlighted
Here to help

Re: Include an exception in a Syslog Server

Jdsilva, thanks for your reply. I'll just filter this in the server side.
Highlighted
Here to help

Re: Include an exception in a Syslog Server

Adam,

Thanks for your help.

Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.