Im using 17.1 on mx67 and cannot setup IPV6 WAN

[Felippe]

I use M67 with Orange Fiber in Poland. The ISP required to use PPPoE and following settingd

• Protocol: PPPoE.
• Encapsulation: LLC.
• Authorization: PAP/CHAP.
• VPI: 0.
• VCI: 35.

• DNS: 194.204.159.1, 194.204.152.34.

But i dont see these settings.

Besides is there any dedicated topic to these beta firmware?

[cmr]

@Felippe click the top left menu, go to groups and select MX IPv6 beta.  You should have access as you have the firmware.

[ww]

In think vpi vci  was never a option on meraki. Only username password 

[PhilipDAth]

Those kinds of settings relate to a DSL connection.  The MX has an Ethernet WAN port.

So you'll need an ISP router style device to bridge the DSL to Ethernet.

[Felippe]

In fact I have an ONT (fibre to ethernet)

My setup looks like that. But I move already to mx beta forum.

[PhilipDAth]

>In fact I have an ONT (fibre to ethernet)

That is not a good sign.  Your ISP specified LLC encapsulation - which can't be used on an ONT with an Ethernet presentation.

Hopefully, your ISP has just given you the wrong information, otherwise, they may have mis-provisioned the circuit.

Actually, it doesn't make you confident about them provisioning the IPv6 side correctly.