Firewall Rules (L3) - Rules not Applying

SOLVED
pBrain
Conversationalist

Firewall Rules (L3) - Rules not Applying

Am I missing something?

I set up this rule:

# 2

Action: DENY

Protocol: ICMPv4

Source: ANY

Port: ANY

Dest: IOT NETWORK

Port: ANY 

 

Why am I still about to ping devices in my IOT Network?  Am I missing something here?

1 ACCEPTED SOLUTION
ww
Kind of a big deal
Kind of a big deal

Did you keep the ping running or  wait for  5+ minutes?

Are you pinging the device  or the svi?

View solution in original post

5 REPLIES 5
CptnCrnch
Kind of a big deal
Kind of a big deal

Any Group Policies in place?

pBrain
Conversationalist

Yes, but those are specifically set to follow the Network Firewall Rules.

ww
Kind of a big deal
Kind of a big deal

Did you keep the ping running or  wait for  5+ minutes?

Are you pinging the device  or the svi?

pBrain
Conversationalist

Kept pinging.  I am going to stop it and try the ping again in 10 minutes (for good measure).

I am pinging the device directly from another device on a different VLAN (not the dashboard).

MilesMeraki
Head in the Cloud

Does the configuration status of the MX show up to date? If not it'll be because the configuration hasn't yet been applied.

 

If not try and stop the session and try again once the configuration status shows up to date.

Eliot F | Simplifying IT with Cloud Solutions
Found this helpful? Give me some Kudos! (click on the little up-arrow below)
Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels