Firewall Rules (L3) - Rules not Applying

[pBrain]

Am I missing something?

I set up this rule:

# 2

Action: DENY

Protocol: ICMPv4

Source: ANY

Port: ANY

Dest: IOT NETWORK

Port: ANY 

Why am I still about to ping devices in my IOT Network?  Am I missing something here?

[CptnCrnch]

Any Group Policies in place?

[pBrain]

Yes, but those are specifically set to follow the Network Firewall Rules.

[ww · Accepted solution]

Did you keep the ping running or  wait for  5+ minutes?

Are you pinging the device  or the svi?

[pBrain]

Kept pinging.  I am going to stop it and try the ping again in 10 minutes (for good measure).

I am pinging the device directly from another device on a different VLAN (not the dashboard).

[MilesMeraki]

Does the configuration status of the MX show up to date? If not it'll be because the configuration hasn't yet been applied.

If not try and stop the session and try again once the configuration status shows up to date.